RLE WiNG TH Temperature and Humidity Sensor

Wireless temperature and humidity sensor with optional calculated dew point

The WiNG-TH Wireless Sensor transfers temperature and humidity readings wire-free to the WiNG Manager. If your facility requires dew point readings, an optional calculated dew point is available through the WiNG-MGR web interface with the use of the WiNG-TH sensors. The transmission range between sensor and management unit is up to 180m. When using an optional WiNG Range Extender this range can be extended up to 300m. The wireless signal transmission takes place every 10/20 seconds. The WiNG-TH Wireless Temperature and Humdity Sensor is available in 900Mhz and 868MHz configurations. The battery can last up to 12 years under normal room temperature conditions

Highlights RLE WiNG TH Temperature and Humidity Sensor:

  • Compact and easy to install wire-free radio sensor for temperature and humidity readings
  • Accuracy: +/- 0.2°C at room temperature, +/- 0.5°C over full operating range
  • Accuracy humidity: +/- 2% 
  • Fully compatible with WiNG Manager and additional WiNG Range Extender
  • Optional calculated dew point when used with the WiNG-MGR
  • Wire-free: 868 or 900MHz (model dependent)
  • Signal transmission every 10/20 seconds (polling rate) to the WiNG Manager
  • Packet transmission accuracy that exceeds 98%
  • Transmission range between sensors and manager:
    • Up to 30,48 m (100‘) through multiple walls
    • Up to 82,3 m (270‘) through one wall
    • Up to 182,88 m (600‘) direct line of sight
    • Up to 304,8 m (1000‘) direct line of sight with a WiNG-RXT range extender