KoldLok Grommets

Raised floor grommets to save energy

Over the past 40 years the IT industry has seen a significant decrease in the use of floor space and a proportional to the increase in the use of IT Infrastructure. Energy consumption has also seen the same increase as the temperatures in data centers should be kept constant to get the best performance from the installed hardware. Maintaining a constant temperature requires lots of energy for additional cooling systems. Unfortunately cable openings waste a huge part of installed airflow in a typical server room.

Patented KoldLok products specifically addresses the issue of bypass airflow in data centres.

Unsealed cable openings allow on an average 63% of conditioned cold air to escape. Using KoldLok raised-floor grommets is a low cost and long term solution for achieving the hardware air intake temperature and humidity conditions required for maximum reliability and performance. It helps to save the additional production of energy and to void unnecessary investments in additional cooling capacities.

Features

  • KoldLok grommets is a inherently self-sealing using a multilayer, overlapping and interwoven bypass airflow closure system
  • The Installation is possible before or after the installation of equipment
  • Available in different sizes
  • KoldLok Integral raised-floor grommet - designed for new installations and fits into the raised-floor tiles prior to the installation of the cabinets
  • KoldLok Integral Split raised-floor grommet designed for new installations on the edge of floor tiles. This raised-floor grommet is in two halves and allows the cables to be removed
  • KoldLok Surface Mount raised-floor grommets designed for existing installations, and because they are in two halves there is no need to disconnect any cables.
  • KoldLok Surface XL raised-floor grommets - designed to fit existing larger openings and effectively seals openings up to 10" x 13" (250mm x 330mm)
  • KoldLok Extended- designed to fit and seal cutouts against walls or, when two are used together, they can seal half a floor tile
Code Description Price
KL-11010 KoldLok Integral
Seals Cutouts 9 3/16" x 6 3/4" (233 x 172mm), Usable Cable Opening 8" x 14" (203 x 102 mm)
On request
KL-13030 KoldLok Integral Split
Seals Cutouts 8" x 4" (233 x 172mm), Usable Cable Opening 8" x 14" (203 x 102 mm)
On request
KL-22020 KoldLok Surface
Seals Cutouts 10" x 7" (254 x 178mm), Usable Cable Opening 8" x 14" (203 x 102 mm)
On request
KL-22030 KoldLok Surface L
Seals Cutouts 10" x 10" (254 x 254mm), Usable Cable Opening 8" x 14" (203 x 102 mm)
On request
KL-22040 KoldLok Surface XL
Seals Cutouts 10" x 13" (254 x 330mm), Usable Cable Opening 8" x 14" (203 x 102 mm)
On request
KL-34010 KoldLok 3"
Seals cutouts 24" x 3" (610 x 76mm) with 3" Filament
On request
KL-34020 KoldLok 6"
Seals cutouts 24" x 3" (610 x 152mm) with 6" Filament
On request
Spare Parts and Accessories
KL-90010 KoldLok Temperature Strip
To monitor Hot Spots
On request

Please contact us on info.us [at] daxten.com.