| Hardware |
- Integrated 10/100 Mbps Ethernet Controller
- Complete VGA graphics on board:
- 4MB graphic chip on board (ATI Rage Mobility)
- Supports all common SVGA modes
- 32 MB SDRAM / 8 MB Flash-ROM
- Three different power sources:
- PCI
- External power supply
- Wake on LAN
- Switch for hard reset of the remote system
- Switch for ATX power on/off of the remote system
- Max. power consumption 1A / 5V
- Power Supply Monitor
- Real Time Clock
|
| Interfaces |
- 10/100/ Mbps Ethernet
- Medium: 10 Mbps: UTP Cat. 3, 4, 5
- 100 Mbps: UTP Cat. 5
- Jack: RJ-45, 100 Ohm, over 100 m
- Auto media detection (NWAY)
- LED:Transmit, Receive transmission speed and Link display for 100-Base TX version
- Full duplex and Half-duplex according 802.3x
- Flow Control according 802.3x
- VGA monitor output
- IPMB
- RS 232 Jack:
- Hardware-Handshake/Modem support
- Hard-Reset connector, twice
- ATX switch, twice
- External power supply 5 V, 1 A, Jack 2.1 mm
|
| Software |
- ROM Firmware
- Embedded Linux 2.4 Kernel + Flash-FS
- Updateable
- modem support
- SNMP agent
- DHCP / BOOTP support
- IPMI support
- System independent administration software
- Access over embedded web server and Java
- Browser built in http for applet verification and transmission
- Optional native Secure Shell access (ssh)
- Tool set: Utility Disk with tools for configuration, ...
|
| Supported Operating Systemsr |
Microsoft Windows 95/98/NT/ME/2000/2003/X),Linux, BSD, Unix |
|
